Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
Gearshift Cam
Inspect the gearshift cam groove for abnormal wear and
damage. If any defects are found, replace the gearshift
cam with a new one.
Gearshift Cam Bearing
Inspect the gearshift cam bearings, left and right for
abnormal noise and smooth rotation.
Replace the bearing if there is anything unusual. Refer
to "Transmission Removal" (Page 5B-3) and
"Transmission Installation" (Page 5B-5).
Driveshaft Bearing
Inspect the driveshaft left bearing for abnormal noise
and smooth rotation while it is in the case.
Replace the bearing if there is anything unusual. Refer
to "Transmission Removal" (Page 5B-3) and
"Transmission Installation" (Page 5B-5).
email: info@motomatrix.co.uk / www.motomatrix.co.uk
Inspect the driveshaft right bearing for abnormal noise
and smooth rotation.
If there is anything unusual, replace the bearing
assembly. Refer to "Transmission Removal" (Page 5B-3)
and "Transmission Installation" (Page 5B-5).
I947H1520053-01
Driveshaft Oil Seal
Inspect the driveshaft left bearing dust seal for wear and
damage.
Replace the dust seal if there is anything unusual. Refer
to "Transmission Removal" (Page 5B-3) and
"Transmission Installation" (Page 5B-5).
I947H1520054-01
Gear Position (GP) Switch Inspection
Refer to "Side-stand / Ignition Interlock System Parts
Inspection" in Section 1I (Page 1I-7).
I947H1520056-01
Manual Transmission:
I837H1520041-01
I947H1520057-01
B947H15206007
5B-13