Suzuki GSX-R1000 Service Manual page 193

Hide thumbs Also See for GSX-R1000:
Table of Contents

Advertisement

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
Step
1
1) Turn the ignition switch OFF.
2) Remove the frame covers. Refer to "Exterior Parts
Removal and Installation" in Section 9D (Page 9D-6).
3) Check the cooling fan relay (1) coupler for loose or poor
contacts.
If OK, then inspection the cooling fan relay. Refer to
"Cooling Fan Inspection" in Section 1F (Page 1F-9).
Is the cooling fan relay OK?
Active Control Inspection
1) Set up the SDS tool. (Refer to SDS operation manual for further details.)
2) Start the engine and run it in idling condition.
3) Click "Cooling fan relay control" (1).
email: info@motomatrix.co.uk / www.motomatrix.co.uk
Action
1
I947H1110107-01
Engine General Information and Diagnosis:
Yes
• O/W and G/R wire
open or shorted to
ground, or poor "42"
connection.
• If wire and
connection are OK,
intermittent trouble or
faulty ECM.
• Recheck each
terminal and wire
harness for open
circuit and poor
connection.
• Replace the ECM
with a known good
one, and inspect it
again. Refer to "ECM
Removal and
Installation" in
Section 1C
(Page 1C-1).
1
I947H1110135-01
1A-125
No
Replace the cooling fan
relay with a new one.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents