Gearshift Cam And Gearshift Forks - Suzuki GZ250 Service Manual

3-49 ENGINE
• Install the washer
washer and shim onto the balancer shaft.
NOTE:
Make sure that the key is aligned with the keyway.
• Align the punch mark
gear with the punch mark
gear
GEARSHIFT CAM AND GEARSHIFT
FORKS
• Align the pin groove of gearshift cam stopper plate
with the pin on the gearshift cam.
• Install the gearshift forks to their respective gears.
• Install the gearshift cam stopper
• Install the gearshift cam
, balancer shaft driven gear
on the balancer shaft driven
on the balancer shaft drive
into the crankcase.