Water Pump Related Parts Inspection; Mechanical Seal; Oil Seal - Suzuki GSX-R1000 Service Manual

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
1F-17 Engine Cooling System:
10) Hold the impeller with water pump pliers and tighten
the impeller securing bolt to the specified torque.
Tightening torque
Impeller securing bolt (a): 8 N·m (0.8 kgf-m, 6.0
lbf-ft)
11) Install new O-ring (8) and apply engine coolant to it.
CAUTION
!
Use a new O-ring to prevent engine coolant
leakage.
12) Tighten the water pump case screws to the specified
torque.
Tightening torque
Water pump case screw: 6 N·m (0.6 kgf-m, 4.5
lbf-ft)
13) Tighten the water pump air bleeder bolt (9) to the
specified torque.
CAUTION
!
Use a new gasket washer to prevent engine
coolant leakage.
Tightening torque
Water pump air bleeder bolt (b): 13 N·m (1.3 kgf-
m, 9.5 lbf-ft)
email: info@motomatrix.co.uk / www.motomatrix.co.uk
7
(a)

Water Pump Related Parts Inspection

Refer to "Water Pump Disassembly and Assembly"
(Page 1F-14).
I947H1160043-02

Mechanical Seal

Visually inspect the mechanical seal for damage, with
particular attention given to the sealing face.
Replace the mechanical seal that shows indications of
leakage.
8

Oil Seal

Visually inspect the oil seal for damage, with particular
attention given to the lip.
Replace the oil seal that shows indications of leakage.
I947H1160044-02
9
(b)
I947H1160045-01
B947H11606019
I947H1160046-01
I947H1160047-01