Rear Shock Absorber Bearing Removal And Installation - Suzuki GSX-R1000 Service Manual

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
Rear Shock Absorber Inspection
Refer to "Rear Shock Absorber Removal and
Installation" (Page 2C-3).
Shock Absorber
Inspect the rear shock absorber for damage and oil
leakage, and absorber bushing for wear and damage. If
any defect is found, replace the rear shock absorber with
a new one.
CAUTION
!
Do not attempt to disassemble the rear shock
absorber. It is unserviceable.
Spacer
1) Remove the spacer from the cushion lever.
2) Inspect the spacer for any flaws or other damage. If
any defect is found, replace the spacer with a new
one.
email: info@motomatrix.co.uk / www.motomatrix.co.uk
Rear Shock Absorber Bearing
B947H12306005
1) Insert the spacer into bearing.
2) Check the play by moving the spacer up and down. If
excessive play is noted, replace the bearing with a
new one. Refer to "Rear Shock Absorber Removal
and Installation" (Page 2C-3).
Rear Shock Absorber Bearing Removal and
Installation
Removal
1) Remove the rear shock absorber. Refer to "Rear
Shock Absorber Removal and Installation"
I947H1230008-01
(Page 2C-3).
2) Remove the spacer (1).
I947H1230009-01
3) Remove the rear shock absorber bearing with the
special tool.
Special tool
(A): 09943–88211 (Pinion bearing installer)
I947H1230010-01
Rear Suspension: 2C-4
I947H1230011-01
B947H12306017
1
I947H1230012-01
(A)
I947H1230013-01