Engine Oil Level Inspection; Oil Pan / Oil Pressure Regulator / Oil Strainer Removal And Installation; Repair Instructions; Engine Oil And Filter Replacement - Suzuki GSX-R1000 Service Manual

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
1E-6 Engine Lubrication System:
10) Check the engine oil level. Refer to "Engine Oil and
Filter Replacement" in Section 0B (Page 0B-10).

Engine Oil and Filter Replacement

Refer to "Engine Oil and Filter Replacement" in Section
0B (Page 0B-10).

Engine Oil Level Inspection

Refer to "Engine Oil and Filter Replacement" in Section
0B (Page 0B-10).
Oil Pan / Oil Pressure Regulator / Oil Strainer
Removal and Installation
NOTE
The oil pan/oil strainer/oil pressure regulator
cannot be serviced with the engine installed
in the frame.
Removal
1) Remove the engine assembly from the frame. Refer
to "Engine Assembly Removal" in Section 1D
(Page 1D-20).
2) Remove the plate (1).
3) Remove the oil pan (2).
4) Remove the gasket (3).
5) Remove the oil pressure regulator (4) and oil strainer
(5).
3
email: info@motomatrix.co.uk / www.motomatrix.co.uk

Repair Instructions

B947H11506001
B947H11506002
B947H11506003
2
1
I947H1150006-01
5
4
I947H1150007-01
11) Install the left side cowling. Refer to "Exterior Parts
Removal and Installation" in Section 9D (Page 9D-
6).
6) Remove the O-ring (6).
Installation
Installation is in the reverse order of removal. Pay
attention to the following points:
• Apply grease to new O-ring (1).
CAUTION
!
Use a new O-ring to prevent oil leakage.
: Grease 99000–25010 (SUZUKI SUPER
GREASE "A" or equivalent)
• Install the oil strainer (2).
1
• Apply grease to new O-ring (3).
CAUTION
!
Use a new O-ring to prevent oil leakage.
: Grease 99000–25010 (SUZUKI SUPER
GREASE "A" or equivalent)
6
I947H1150008-01
2
I947H1150009-01