3-49
ENGINE
• Install the washer
washer and shim onto the balancer shaft.
NOTE:
Make sure that the key is aligned with the keyway.
• Align the punch mark
gear with the punch mark
gear
GEARSHIFT CAM AND GEARSHIFT
FORKS
• Align the pin groove of gearshift cam stopper plate
with the pin
• Install the gearshift forks to their respective gears.
• Install the gearshift cam stopper
• Install the gearshift cam
Downloaded from
www.Manualslib.com
,
balancer shaft driven gear
on the balancer shaft driven
on the balancer shaft drive
on the gearshift cam.
into the crankcase.
manuals search engine