Drive Mode Selector Description; A-Mode; B-Mode - Suzuki GSX-R1000 Service Manual

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
NOTE
If the indicator light flashes fast, turn the
ignition switch OFF then ON to make
judgment again as there is possible
misjudgment due to environmental radio
interference.
CAUTION
!
When the battery performance is lowered in
winter (low temperature), the system may at
times makes a re-judgment at the time of
beginning the starter motor operation. In this
case, the indicator light operation starts
immediately after the starter operation.
5. Indicator light

Drive Mode Selector Description

Engine power characteristics can be changed in 3
modes by operating the drive mode selector to meet
various riding conditions and rider's preference.
email: info@motomatrix.co.uk / www.motomatrix.co.uk
5
I947H1180003-01
B947H11801002
I947H1180015-01
Operation
Drive mode is preset at A-mode when the ignition switch
and engine stop switch are turned on. Follow the
procedure below to operate drive mode selector.
1) Turn on the ignition switch and engine stop switch.
2) Push the drive mode selector UP
for 1 second until the drive mode indicator
shows A.
3) Push the drive mode selector to change drive mode.
Pushing the UP switch can change from A to C
to B to A. Pushing the DOWN
from A to B to C to A. The drive mode indicator
indicates actual drive mode.
NOTE
• Operating the drive mode selector while
riding with the throttle opened will change
the engine speed because of engine power
characteristics change.
• Drive mode indicator blinks when drive
mode change operation is failed.
• Turning off the ignition switch or engine
stop switch will return the drive mode to A-
mode. Start the engine and reset the drive
mode.
Drive Mode

A-mode

A-mode provides sharp throttle response at all throttle
opening range to obtain maximum engine power.

B-mode

B-mode provides softer throttle response than A-mode
up to middle throttle opening range.
C-mode
C-mode provides soft throttle response at all throttle
opening range by reducing engine power.
Engine power
A B
Ignition System: 1H-2
or DOWN
switch can change
A, B
C
Throttle opening
I838H1180001-01