Suzuki GSX-R1000 Service Manual page 337

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
Installation
1) Install the dowel pins.
2) Apply grease to new O-ring.
CAUTION
!
Use a new O-ring to prevent oil leakage.
: Grease 99000–25010 (SUZUKI SUPER
GREASE "A" or equivalent)
3) Install the oil pump.
NOTE
Engage the oil pump shaft end with the water
pump shaft slot.
email: info@motomatrix.co.uk / www.motomatrix.co.uk
4) Tighten the oil pump mounting bolts to the specified
torque.
Tightening torque
Oil pump mounting bolt (a): 10 N·m (1.0 kgf-m,
7.0 lbf-ft)
5) Install the washer (1).
6) Install the oil pump driven sprocket (2) with the chain
(3).
I947H1150031-01 7) Apply a small quantity of thread lock to the oil pump
driven sprocket bolt (4) and tighten it to the specified
torque.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER "1322" or
equivalent)
Tightening torque
Oil pump driven sprocket bolt (b): 10 N·m (1.0
kgf-m, 7.0 lbf-ft)
I947H1150032-01
8) Install the oil pan, oil strainer and oil pressure
regulator. Refer to "Oil Pan / Oil Pressure Regulator /
Oil Strainer Removal and Installation" (Page 1E-6).
Engine Lubrication System:
(a)
4
(b)
1
2
1E-13
I947H1150033-01
3
I947H1150034-01