Wheel / Tire / Air Valve Inspection And Cleaning; Air Valve Removal And Installation - Suzuki GSX-R1000 Service Manual

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
7) When the bead has been fitted properly, adjust the
pressure to specification.
8) As necessary, adjust the tire balance. Refer to
"Wheel Balance Check and Adjustment" (Page 2D-
17).
Cold inflation tire pressure
Front
Solo 250 kPa
2
riding (2.50 kgf/cm , 36 psi)
Dual 250 kPa
2
riding (2.50 kgf/cm , 36 psi)
9) Install the mounting drum to the rear wheel.
(For rear wheel)
Refer to "Rear Wheel Assembly Removal and
Installation" (Page 2D-11).
10) Install the wheel assembly. Refer to "Front Wheel
Assembly Removal and Installation" (Page 2D-4)
and "Rear Wheel Assembly Removal and
Installation" (Page 2D-11).

Wheel / Tire / Air Valve Inspection and Cleaning

Refer to "Tire Removal and Installation" (Page 2D-14).
Wheel
Wipe the wheel clean and check for the following points:
• Distortion and crack
• Any flaws and scratches at the bead seating area.
• Wheel rim runout. Refer to "Front Wheel Related
Parts Inspection" (Page 2D-6) and "Rear Wheel
Related Parts Inspection" (Page 2D-12).
Tire
Tire must be checked for the following points:
• Nick and rupture on side wall
• Tire tread depth (Refer to "Tire Inspection" in Section
0B (Page 0B-18).)
• Tread separation
• Abnormal, uneven wear on tread
• Surface damage on bead
• Localized tread wear due to skidding (Flat spot)
• Abnormal condition of inner liner
email: info@motomatrix.co.uk / www.motomatrix.co.uk
Rear
290 kPa
2
(2.90 kgf/cm , 42 psi)
290 kPa
2
(2.90 kgf/cm , 42 psi)
B947H12406012
I649G1240041-02
Air Valve
Inspect the air valve for peeling and damage. If any
defect is found, replace the air valve with a new one.
Refer to "Air Valve Removal and Installation" (Page 2D-
16).
Inspect the valve core seal (1) for wear and damage. If
any defect is found, replace the valve core with a new
one. Refer to "Air Valve Removal and Installation"
(Page 2D-16).
1. Seal

Air Valve Removal and Installation

Removal
1) Remove the wheel assembly. Refer to "Front Wheel
Assembly Removal and Installation" (Page 2D-4)
and "Rear Wheel Assembly Removal and
Installation" (Page 2D-11).
2) Remove the tire. Refer to "Tire Removal and
Installation" (Page 2D-14).
Wheels and Tires: 2D-16
I649G1240042-02
I649G1240043-02
I649G1240044-02
1
I649G1240045-02
B947H12406013