Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
9D-10 Exterior Parts:
12) Remove the body cowling assembly (4) forward.
4
13) Disassemble the body cowling assembly. Refer to
"Headlight Removal and Installation" in Section 9B
(Page 9B-1).
Installation
Install the body cowling in the reverse order of removal.
Pay attention to the following point:
• Adjust the headlight beam if necessary. Refer to
"Headlight Beam Adjustment" in Section 9B
(Page 9B-3).
Intake Pipe
Removal
1) Remove the body cowling.
2) Remove the intake pipes (1). (LH & RH)
Installation
Install the intake pipes in the reverse order of removal.
email: info@motomatrix.co.uk / www.motomatrix.co.uk
I947H1940026-01
1
I947H1940027-01
Cowling Brace
Removal
1) Remove the body cowling.
2) Remove the cowling brace (1).
Installation
Install the cowling brace in the reverse order of removal.
Pay attention to the following point:
• Tighten the cowling brace mounting bolts (1) to the
specified torque.
Tightening torque
Cowling brace mounting bolt (a): 23 N·m (2.3 kgf-
m, 16.5 lbf-ft)
1
(a)
1
I947H1940028-01
I947H1940029-01