Use Of Sds - Suzuki GSX-R1000 Service Manual

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
7) Turn the ignition switch OFF and disconnect the
special tool from the mode select switch coupler.
8) Reinstall the front seat.

Use of SDS

NOTE
• Do not disconnect the coupler from ECM,
battery cable from battery, ECM ground
wire from the engine or main fuse before
confirming DTC (Diagnostic Trouble Code)
stored in memory. Such disconnection
may erase the memorized information in
ECM memory.
• DTC stored in ECM memory can be
checked by SDS.
• Be sure to read "Precautions for Electrical
Circuit Service" in Section 00 (Page 00-2)
before inspection and observe what is
written there.
1) Remove the front seat. Refer to "Exterior Parts
Removal and Installation" in Section 9D (Page 9D-
6).
2) Set up the SDS tools. (Refer to the SDS operation
manual for further details.)
Special tool
(A): 09904–41010 (SUZUKI Diagnostic
system set)
(B): 99565–01010–020 (CD-ROM Ver.20)
email: info@motomatrix.co.uk / www.motomatrix.co.uk
Engine General Information and Diagnosis:
3) Click the DTC inspection button (1).
I947H1110009-01
1A-13
(A)
(B)
I705H1110116-03
1
I705H1110003-01