Rear Brake Master Cylinder Parts Inspection - Suzuki GSX-R1000 Service Manual

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
Assembly
Assemble the master cylinder in the reverse order of
disassembly. Pay attention to the following points:
CAUTION
!
• Wash the master cylinder components with
new brake fluid before reassembly.
• Do not wipe the brake fluid off after
washing the components.
• When washing the components, use the
specified brake fluid. Never use different
types of fluid or cleaning solvents such as
gasoline, kerosine, etc.
• Apply brake fluid to the master cylinder
bore and all of the master cylinder
component to be inserted into the bore.
BF: Brake fluid (DOT 4)
• Apply grease to the push rod end.
: Grease 99000–25100 (SUZUKI SILICONE
GREASE or equivalent)
email: info@motomatrix.co.uk / www.motomatrix.co.uk
Brake Control System and Diagnosis:
CAUTION
!
Replace the O-ring with a new one.

Rear Brake Master Cylinder Parts Inspection

Refer to "Rear Brake Master Cylinder Disassembly and
Assembly" (Page 4A-16).
Master Cylinder
Inspect the master cylinder bore for any scratches or
other damage.
I947H1410038-01
Piston / Rubber Parts
Inspect the piston surface for any scratches or other
damage.
Inspect the primary cup, secondary cup and dust boot
for wear or damage.
I947H1410039-02
1
I947H1410055-01
B947H14106018
I947H1410040-02
I837H1410050-01
4A-17