Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
Brake Control System and Diagnosis
Brake
Front Brake Hose Routing Diagram
"B"
(a)
1. Hose clamp
: Clamp end should face downward.
2. Stopper
: After the brake hose union has contacted to the stopper, tighten the union bolt.
3. Hose guide
: Pass the brake hose through the hose guide.
4. Stopper
: After positioning the clamp with the stopper, tighten the clamp bolt.
5. Hose clamp
: Insert the clamp end into the hole on the front fender.
email: info@motomatrix.co.uk / www.motomatrix.co.uk
Schematic and Routing Diagram
1
2
(a)
2
Brake Control System and Diagnosis:
"C"
"B"
4
"A": White marking
: White marking should be on right side and face upward.
"B": Clamp the brake hose firmly.
"C": Pass the brake hose through rear side of the throttle cables.
: 23 N⋅m (2.3 kgf-m, 16.5 lbf-ft)
4A-1
B947H14102001
3
"A"
5
(a)
2
I947H1410046-02