Rear Wheel Related Parts Inspection - Suzuki GSX-R1000 Service Manual

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys

Rear Wheel Related Parts Inspection

Refer to "Rear Wheel Assembly Removal and
Installation" (Page 2D-11).
Tire
Refer to "Tire Inspection" in Section 0B (Page 0B-18).
Rear Brake Disc
Refer to "Rear Brake Disc Inspection" in Section 4C
(Page 4C-7).
Wheel Damper
Refer to "Drive Chain Related Parts Inspection" in
Section 3A (Page 3A-5).
Sprocket
Refer to "Drive Chain Related Components" in Section
3A (Page 3A-1).
Dust Seal
Inspect the dust seal lip for wear or damage. If any
defects is found, replace the dust seal with a new one.
Refer to "Rear Wheel Dust Seal / Bearing Removal and
Installation" (Page 2D-13).
Wheel Axle
Using a dial gauge, check the wheel axle for runout, If
the runout exceeds the limit, replace the axle shaft.
Wheel axle runout
Service limit: 0.25 mm (0.010 in)
Special tool
(A): 09900–20607 (Dial gauge)
(B): 09900–20701 (Dial gauge chuck)
(C): 09900–21304 (V blocks)
email: info@motomatrix.co.uk / www.motomatrix.co.uk
B947H12406009
Wheel
1) Remove the rear brake pads. Refer to "Rear Brake
Pad Replacement" in Section 4C (Page 4C-2).
2) Make sure that the wheel runout checked as shown
in the figure does not exceed the service limit. An
excessive runout is usually due to worn or loosened
wheel bearings and can be reduced by replacing the
bearings. If bearing replacement fails to reduce the
runout, replace the wheel.
Wheel rim runout
Service limit (Axial and Radial): 2.0 mm (0.08 in)
I947H1240018-02
3) Install the rear brake pads. Refer to "Rear Brake Pad
Replacement" in Section 4C (Page 4C-2).
Bearing
Inspect the play of the wheel bearings by hand while
they are in the wheel. Rotate the inner race by hand to
inspect for abnormal noise and smooth rotation. Replace
the bearing if there is anything unusual. Refer to "Rear
Wheel Dust Seal / Bearing Removal and Installation"
(Page 2D-13).
Wheels and Tires:
(A)
(B)
(C)
I649G1230034-03
I649G1240014-02
I649G1240015-02
2D-12