Cmp Sensor Inspection; Cmp Sensor Removal And Installation; Ckp Sensor Inspection; Ckp Sensor Removal And Installation - Suzuki GSX-R1000 Service Manual

Hide thumbs Also See for GSX-R1000:
Table of Contents

Advertisement

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
1C-2 Engine Electrical Devices:

CMP Sensor Inspection

Refer to "DTC "C11" (P0340): CMP Sensor Circuit
Malfunction" in Section 1A (Page 1A-29).

CMP Sensor Removal and Installation

Removal
1) Remove the air cleaner box. Refer to "Air Cleaner
Box Removal and Installation" in Section 1D
(Page 1D-7).
2) Remove the PAIR control solenoid valve. Refer to
"PAIR Control Solenoid Valve Removal and
Installation" in Section 1B (Page 1B-9).
3) Disconnect the coupler (1) and remove the CMP
sensor (2).
1
Installation
Install the CMP sensor in the reverse order of removal.
Pay attention to the following points:
CAUTION
!
When installing the CMP sensor, make sure
to clean the sensor surface.
• Tighten the CMP sensor bolt (1) to the specified
torque.
Tightening torque
CMP sensor bolt (a): 10 N·m (1.0 kgf-m, 7.0 lbf-ft)
1
(a)

CKP Sensor Inspection

Refer to "CKP Sensor Inspection" in Section 1H
(Page 1H-9).
email: info@motomatrix.co.uk / www.motomatrix.co.uk
B947H11306002
B947H11306003
2
I947H1130004-02
I947H1130005-02
B947H11306004

CKP Sensor Removal and Installation

Removal
1) Remove the clutch cover. Refer to "Clutch Removal"
in Section 5C (Page 5C-5).
2) Remove the CKP sensor (1).
1
Installation
Install the CKP sensor in the reverse order of removal.
Refer to "Clutch Installation" in Section 5C (Page 5C-7).
IAP Sensor Inspection
Refer to "DTC "C13" (P0105-H/L): IAP Sensor Circuit
Malfunction" in Section 1A (Page 1A-35).
IAP Sensor Removal and Installation
Removal
1) Lift and support the fuel tank. Refer to "Fuel Tank
Removal and Installation" in Section 1G (Page 1G-
9).
2) Disconnect the coupler (1) and vacuum hose (2).
3) Remove the IAP sensor (3) from the air cleaner box.
3
2
Installation
Install the IAP sensor in the reverse order of removal.
TP Sensor Inspection
Refer to "DTC "C14" (P0120-H/L): TP Sensor Circuit
Malfunction" in Section 1A (Page 1A-43).
B947H11306005
I947H1130006-01
B947H11306006
B947H11306007
1
I947H1130007-01
B947H11306008

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents