Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
P1654-H (Use of SDS)
Step
1
1) Turn the ignition switch OFF.
2) Lift and support the fuel tank. Refer to "Fuel Tank
Removal and Installation" in Section 1G (Page 1G-9).
3) Check the STP sensor couplers (1) and (2) for loose or
poor contacts.
If OK, then check the STP sensor lead wire continuity.
4) Disconnect the STP sensor couplers (1) and (2).
5) Check the continuity between the Y/W wire and R wire.
If the sound is not heard from the tester, the circuit
condition is OK.
Special tool
(A): 09900–25008 (Multi circuit tester set)
Tester knob indication
Continuity (
6) Disconnect the ECM couplers. Refer to "ECM Removal
and Installation" in Section 1C (Page 1C-1).
email: info@motomatrix.co.uk / www.motomatrix.co.uk
Action
2
1
)
(A)
Engine General Information and Diagnosis:
Yes
Go to Step 3.
I947H1110046-01
I947H1110047-02
1A-81
No
Y/W wire shorted to
VCC, or B/Br wire open.