Suzuki GSX-R1000 Service Manual page 453

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
6) Remove the left muffler and muffler chamber heat
guard No. 2. Refer to "Muffler / Muffler Chamber /
Exhaust Pipe Removal and Installation" in Section
1K (Page 1K-11).
7) Remove the rear shock absorber (3) and cushion
lever mounting bolt and nut (4). Refer to "Rear
Shock Absorber Removal and Installation"
(Page 2C-3) and "Cushion Lever Removal and
Installation" (Page 2C-7).
8) Remove the swingarm pivot shaft lock-nut with the
special tool.
Special tool
(A): 09940–14940 (Swingarm pivot thrust
adjuster wrench)
9) Hold the swingarm pivot shaft (5) with the special
tool and remove the swingarm pivot nut (6).
Special tool
(B): 09944–28321 (Hexagon socket (19
mm))
5
(B)
email: info@motomatrix.co.uk / www.motomatrix.co.uk
3
4
I947H1230058-02
(A)
I947H1230033-01
6
I947H1230034-01
10) Remove the swingarm pivot shaft.
11) Remove the swingarm assembly.
12) Remove the mudguard (7), chain case (8) and chain
buffer (9) from the swingarm.
7
9
13) Remove the plate (10).
Installation
Install the swingarm in the reverse order of removal. Pay
attention to the following points:
• Install the plate.
NOTE
When reusing the removed screw (1), apply a
small quantity of the thread lock to it.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER "1322" or
equivalent)
Rear Suspension: 2C-10
8
I947H1230035-01
10
I947H1230036-01
1
I947H1230037-01