Suzuki GSX-R1000 Service Manual page 164

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
1A-96 Engine General Information and Diagnosis:
Step
2 1) Check the continuity between each ISC valve terminal
and ground.
Special tool
(A): 09900–25008 (Multi circuit tester set)
Tester knob indication
Resistance (Ω)
ISC valve continuity
∞ Ω (Infinity)
(Terminal – Ground)
2) If OK, then measure the resistance (between the Bl wire
terminal "A" and Y wire terminal "B") and (between the G
wire terminal "C" and Br wire terminal "D").
ISC valve resistance
Approx. 80 Ω at 20 °C (68 °F)
(Terminal: "A" – Terminal: "B", Terminal: "C" –
Terminal: "D")
Is the resistance OK?
email: info@motomatrix.co.uk / www.motomatrix.co.uk
Action
(A)
I947H1110068-01
(A)
"B"
"D"
"C" "A"
I947H1110069-01
Yes
If wire is OK, Replace the ISC valve
intermittent trouble or with a new one. Refer to
faulty ECM. "Throttle Body Removal
and Installation" in
Section 1D (Page 1D-
10).
No