Tp Sensor Removal And Installation; Tp Sensor Adjustment - Suzuki GSX-R1000 Service Manual

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys

TP Sensor Removal and Installation

Refer to "Throttle Body Disassembly and Assembly" in
Section 1D (Page 1D-11).
Removal
1) Remove the throttle body. Refer to "Throttle Body
Removal and Installation" in Section 1D (Page 1D-
10).
2) Remove the TP sensor (1) with the special tool.
Special tool
: 09930–11950 (Torx wrench (5 mm))
NOTE
Prior to disassembly, mark the TP sensor's
original position with a paint or scribe for
accurate reinstallation.
1
Installation
Install the TP sensor in the reverse order of removal.
Refer to "Throttle Body Disassembly and Assembly" in
Section 1D (Page 1D-11).

TP Sensor Adjustment

Inspect the TP sensor setting position and adjust it if
necessary in the following procedures:
1) Connect the special tool (Mode select switch) to the
dealer mode coupler. Refer to "Self-Diagnostic
Procedures" in Section 1A (Page 1A-12).
Special tool
: 09930–82720 (Mode selection switch)
2) Warn up the engine and keep it running in idling
speed.
3) Turn the mode select switch ON.
email: info@motomatrix.co.uk / www.motomatrix.co.uk
4) Check the position of the bar in the left of C code
B947H11306009
displayed on the LCD panel.
"A": Incorrect position
5) If the TP sensor adjustment is necessary, turn off the
engine and lift up the throttle body from the intake
pipes. Refer to "Throttle Body Removal and
Installation" in Section 1D (Page 1D-10).
6) Loosen the TP sensor mounting screw using the
special tool and turn the TP sensor to bring the bar
to the correct position.
Special tool
: 09930–11950 (Torx wrench (5 mm))
I947H1130008-01
B947H11306010
7) Tighten the TP sensor mounting screw to the
specified torque.
Tightening torque
TP sensor mounting screw: 3.5 N·m (0.35 kgf-
m, 2.5 lbf-ft)
8) Reinstall the throttle body.
9) Turn on the engine and make sure that the TP
sensor bar is at the correct position.
10) Turn off the engine and reinstall the removed parts.
Engine Electrical Devices:
"A"
"B"
"A"
I823H1130022-01
"B": Correct position
I947H1130009-01
1C-3