Suzuki GSX-R1000 Service Manual page 405

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
5) Remove the gasket (3) and dowel pins.
6) Hold the generator rotor with the special tool and
remove the generator rotor bolt.
Special tool
(A): 09930–44530 (Rotor holder)
7) Screw in the special tool to the crankshaft.
8) Remove the generator rotor (4) using the special
tool.
Special tool
(B): 09930–30460 (Rotor remover bolt)
(C): 09930–34970 (Rotor remover)
(C)
email: info@motomatrix.co.uk / www.motomatrix.co.uk
3
I947H11A0007-01
(A)
I947H11A0008-01
4
(B)
I947H11A0009-03
(C)
9) Remove the generator stator (5).
Installation
Install the generator in the reverse order of removal. Pay
attention to the following points:
• Tighten the generator stator set bolts and generator
lead wire set bolt to the specified torque.
Tightening torque
Generator stator set bolt (a): 11 N·m (1.1 kgf-m,
8.0 lbf-ft)
Generator lead wire set bolt (b): 5.5 N·m (0.55 kgf-
m, 4.0 lbf-ft)
• Apply bond lightly to the generator lead wire grommet
(1).
: Sealant 99000–31140 (SUZUKI BOND
No.1207B or equivalent)
1
Charging System: 1J-5
(B)
I947H11A0022-02
5
I947H11A0010-01
(b)
(a)
I947H11A0011-03