Suzuki GSX-R1000 Service Manual page 301

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
• Tighten the water pump mounting bolts (2) to the
specified torque.
Tightening torque
Water pump mounting bolt (a): 10 N·m (1.0 kgf-
m, 7.0 lbf-ft)
• Apply engine coolant to the O-ring.
CAUTION
!
Replace the O-ring with a new one.
• Tighten the water inlet connector mounting bolts.
Generator
Install the generator rotor and cover (1). Refer to
"Generator Removal and Installation" in Section 1J
(Page 1J-4).
email: info@motomatrix.co.uk / www.motomatrix.co.uk
2
(a)
I947H1140205-02
I947H1140206-01
1
I947H1140207-01
Cam Chain / Cam Chain Tensioner / Cam Chain
Guide No. 1
• Install the cam chain drive sprocket (1) to the
crankshaft.
NOTE
When installing the cam chain drive sprocket,
align the wide spline teeth of the sprocket
and crankshaft.
• Install the cam chain (2).
• Insert the cam chain tensioner and tighten the cam
chain tensioner bolt (3) to the specified torque.
Tightening torque
Cam chain tensioner bolt (a): 23 N·m (2.3 kgf-m,
16.5 lbf-ft)
• Insert the cam chain guide No. 1 while pulling the
chain upward.
• Tighten the cam chain guide No. 1 bolt (4) to the
specified torque.
Tightening torque
Cam chain guide No. 1 bolt (b): 23 N·m (2.3 kgf-
m, 16.5 lbf-ft)
3
(a)
Engine Mechanical: 1D-67
1
2
I947H1140208-01
4
(b)
I947H1140209-01