Rear Combination Light Removal And Installation; Rear Combination Light Replacement - Suzuki GSX-R1000 Service Manual

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
9B-6 Lighting Systems:
Rear Combination Light Removal and
Installation
Removal
1) Remove the frame cover assembly. Refer to
"Exterior Parts Removal and Installation" in Section
9D (Page 9D-6).
2) Remove the clamps (1).
3) Disconnect the combination light coupler (2).
4) Remove the rear combination light assembly (3).
3
5) Remove the combination light bracket (4).
email: info@motomatrix.co.uk / www.motomatrix.co.uk
B947H19206009
1
2
I947H1920018-01
4
I947H1920019-01
Installation
Install the rear combination light in the reverse order of
removal. Pay attention to the following point:
• Tighten the combination light mounting bolts (1) to the
specified torque.
NOTE
When reusing the removed bolts (1), apply a
small quantity of the thread lock to them.
Tightening torque
Rear combination light mounting bolt (a): 2.8 N·m
(0.28 kgf-m, 2.0 lbf-ft)
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER "1322" or
equivalent)

Rear Combination Light Replacement

CAUTION
!
If LED operation is abnormal, replace the rear
combination light with a new one.
1
(a)
I947H1920020-01
B947H19206010