Suzuki GSX-R1000 Service Manual page 484

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
3A-4 Drive Chain / Drive Train / Drive Shaft:
5) Remove the retainer (3).
6) Remove the wheel dampers (4).
4
Installation
Install the rear sprocket and rear sprocket mounting
drum in the reverse order of removal. Pay attention to
the following points:
• Apply grease to the contacting surface between the
rear wheel hub and rear sprocket mounting drum.
: Grease 99000–25010 (SUZUKI SUPER
GREASE "A" or equivalent)
• Apply special tire lubricant or neutral soapy liquid to
the wheel damper surfaces "A".
CAUTION
!
Never use oil, grease or gasoline on the
wheel damper in place of the tire lubricant or
neutral soapy liquid.
"A"
email: info@motomatrix.co.uk / www.motomatrix.co.uk
3
I947H1310003-01
4
I947H1310004-01
I947H1310005-01
• Apply grease to the retainer.
: Grease 99000–25010 (SUZUKI SUPER
GREASE "A" or equivalent)
• Install the rear sprocket so that the letters "B" face
outside.
• Tighten the rear sprocket nuts to the specified torque.
Tightening torque
Rear sprocket nut (a): 60 N·m (6.0 kgf-m, 43.0 lbf-
ft)
• Install the rear wheel assembly. Refer to "Rear Wheel
Assembly Removal and Installation" in Section 2D
(Page 2D-11).
I947H1310006-01
"B"
I947H1310007-01
(a)
I947H1310008-01