Oil Pressure Switch Removal And Installation - Suzuki GSX-R1000 Service Manual

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
5) Remove the oil cooler guard (4).
Installation
Install the oil cooler and oil cooler hoses in the reverse
order of removal. Pay attention to the following points:
• Apply thread lock to the oil cooler mounting bolt and
tighten them securely.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER "1322" or
equivalent)
• Apply engine oil to new O-rings.
CAUTION
!
Replace the O-rings with new ones to prevent
oil leakage.
email: info@motomatrix.co.uk / www.motomatrix.co.uk
4
• Apply thread lock to the oil cooler hose bolts and
I947H1150017-01
tighten them securely.
(THREAD LOCK CEMENT SUPER "1322" or
equivalent)
• Pour engine oil. Refer to "Engine Oil and Filter
Replacement" in Section 0B (Page 0B-10).
• Install the removed parts.
I947H1150045-01

Oil Pressure Switch Removal and Installation

Refer to "Electrical Components Location" in Section 0A
(Page 0A-7).
Removal
1) Turn the ignition switch OFF.
2) Remove the left side cowling. Refer to "Exterior
3) Drain engine oil. Refer to "Engine Oil and Filter
4) Disconnect the oil pressure switch lead wire (1).
I947H1150018-01
Engine Lubrication System:
: Thread lock cement 99000–32110
Parts Removal and Installation" in Section 9D
(Page 9D-6).
Replacement" in Section 0B (Page 0B-10).
1E-9
I947H1150019-01
I947H1150044-01
B947H11506007