Suzuki GSX-R1000 Service Manual page 297

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
• Tighten the crankshaft journal bolts (M9). Tighten
each bolt a little at a time to equalize the pressure in
the following two steps.
CAUTION
!
Fit new gasket washers to the bolts "A" to
prevent oil leakage.
Tightening torque
Crankshaft journal bolt (M9): 18 N⋅m (1.8 kgf-m,
13.0 lbf-ft) then turn in 50°
"A"
• Tighten the crankcase bolts a little at a time to
equalize the pressure.
• Install the cap (2).
CAUTION
!
• Fit new gasket washers to the bolts "B" to
prevent oil leakage.
• Fit new O-ring to the cap (2) and apply
grease to it.
Tightening torque
Crankcase bolt (M8) (Initial): 15 N·m (1.5 kgf-m,
11.0 lbf-ft)
Crankcase bolt (M8) (Final): 26 N·m (2.6 kgf-m,
19.0 lbf-ft)
Crankcase bolt (M6): 12 N·m (1.2 kgf-m, 8.5 lbf-ft)
email: info@motomatrix.co.uk / www.motomatrix.co.uk
"A"
I947H1140184-01
• After the crankshaft journal bolts and crankcase bolts
have been tightened, check that the crankshaft
rotates smoothly.
• Also check that the driveshaft and countershaft rotate
smoothly.
I947H1140185-01
• Install the clutch push rod oil seal retainer (3).
Engine Mechanical:
"B"
"B"
"B"
1D-63
I947H1140186-02
2
I947H1140187-03
I947H1140188-01
I947H1140189-01