Suzuki GSX-R1000 Service Manual page 204

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
1A-136 Engine General Information and Diagnosis:
Step
2 1) Turn the ignition switch ON.
2) Measure the voltage between B/Bl wire and ground.
Special tool
(A): 09900–25008 (Multi circuit tester set)
Tester knob indication
Voltage ( )
Steering damper solenoid valve voltage
Approx. 10 V when battery is fully charged condition
((+) terminal: B/Bl – (–) terminal: Ground)
Is the voltage OK?
email: info@motomatrix.co.uk / www.motomatrix.co.uk
Action
(A)
I947H1110113-01
Yes
• B/Bl (W) wire shorted • Low battery voltage
to VCC, or poor "26"
connection failure.
• B/Bl (W) wire open or
• B/O (Br) wire open or
shorted to ground, or
poor "25" connection
failure.
• If wire and
• If wire and
connection are OK,
intermittent trouble or
faulty ECM.
• Recheck each
• Recheck each
terminal and wire
harness for open
circuit and poor
connection.
• Replace the ECM
• Replace the ECM
with a known good
one, and inspect it
again.
No
or fuse is blown.
shorted to ground, or
poor "26" connection
failure.
connection are OK,
intermittent trouble or
faulty ECM.
terminal and wire
harness for open
circuit and poor
connection.
with a known good
one, and inspect it
again.