C13 (Use Of Mode Select Switch) - Suzuki GSX-R1000 Service Manual

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
1A-36 Engine General Information and Diagnosis:

C13 (Use of mode select switch)

Step
1 1) Turn the ignition switch OFF.
2) Lift and support the fuel tank. Refer to "Fuel Tank
Removal and Installation" in Section 1G (Page 1G-9).
3) Check the IAP sensor coupler (1) for loose or poor
contacts.
If OK, then measure the IAP sensor input voltage.
4) Disconnect the IAP sensor coupler.
5) Turn the ignition switch ON.
6) Measure the input voltage between the R wire and
ground.
If OK, then measure the voltage between the R wire and
B/Br wire.
Special tool
(A): 09900–25008 (Multi circuit tester set)
Tester knob indication
Voltage ( )
IAP sensor input voltage
4.5 – 5.5 V
((+) terminal: R – (–) terminal: Ground, (+) terminal: R
– (–) terminal: B/Br)
V
Is the voltage OK?
email: info@motomatrix.co.uk / www.motomatrix.co.uk
Action
1
I947H1110016-01
(A)
I823H1110016-05
Yes
Go to Step 3. • Loose or poor
• Open or short circuit
No
contacts on the ECM
coupler.
in the R or B/Br wire.