Cylinder Head Cover Disassembly And Assembly - Suzuki GSX-R1000 Service Manual

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
• Tighten the cylinder head cover bolts to the specified
torque in two steps.
Tightening torque
Cylinder head cover bolt (Initial): 10 N·m (1.0 kgf-
m, 7.0 lbf-ft)
Cylinder head cover bolt (Final): 14 N·m (1.4 kgf-
m, 10.0 lbf-ft)
• Install the spark plugs. Refer to "Ignition Coil and
Spark Plug Removal and Installation" in Section 1H
(Page 1H-6).
Cylinder Head Cover Disassembly and
Assembly
Disassembly
1) Remove the cylinder head cover. Refer to "Engine
Top Side Disassembly" (Page 1D-26).
2) Remove the gaskets (1) and (2).
1
3) Remove the PAIR control solenoid valve (3) along
with the PAIR reed valve covers (4).
4
email: info@motomatrix.co.uk / www.motomatrix.co.uk
I947H1140063-02
B947H11406045
2
I947H1140100-01
3
I947H1140102-02
4) Remove the PAIR reed valves (5) and CMP sensor
(6).
6
Assembly
Assembly is in the reverse order of disassembly. Pay
attention to the following points:
• Install the CMP sensor.
NOTE
When installing the CMP sensor, clean the
sensor surface.
• Tighten the CMP sensor bolt (1) to the specified
torque.
Tightening torque
CMP sensor bolt (a): 10 N·m (1.0 kgf-m, 7.0 lbf-ft)
• Install the PAIR reed valves.
Engine Mechanical: 1D-35
5
I947H1140103-02
1
(a)
I947H1140105-02