Suzuki GSX-R1000 Service Manual page 295

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
10) Check the conrod movement for smooth turning.
11) Insert the right and left thrust bearings with the oil
grooves "B" facing towards the crankshaft web.
NOTE
• Right-thrust bearing has green painting.
• Inspect and select the crankshaft thrust
clearance if necessary. Refer to
"Crankshaft Thrust Clearance Inspection
and Selection" (Page 1D-82).
"B"
Transmission
Install the transmission. Refer to "Transmission
Installation" in Section 5B (Page 5B-5).
email: info@motomatrix.co.uk / www.motomatrix.co.uk
I947H1140176-01
Balancer Shaft
• Apply a molybdenum oil solution to each balancer
shaft journal and bearing lightly.
M/O: Molybdenum oil (MOLYBDENUM OIL
SOLUTION)
• Set the balancer shaft so that its punch mark "A" is
aligned with the index "B" on the crankshaft.
• Install the plug (1).
"B"
I947H1140177-02
I947H1140178-01
Engine Mechanical:
I947H1140179-01
"B"
"A"
I947H1140180-01
1
I947H1140181-01
1D-61