Throttle Body Removal And Installation - Suzuki GSX-R1000 Service Manual

Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
1D-10 Engine Mechanical:

Throttle Body Removal and Installation

Removal
1) Remove the side cowlings. Refer to "Exterior Parts
Removal and Installation" in Section 9D (Page 9D-
6).
2) Remove the air cleaner box. Refer to "Air Cleaner
Box Removal and Installation" (Page 1D-7).
3) Remove the clamps (1).
4) Disconnect the IAP sensor (2) from the vacuum
hose.
5) Disconnect the STVA lead wire coupler (3).
6) Disconnect secondary fuel injector couplers (4) and
primary fuel injector couplers (5).
7) Disconnect the purge hose (6) from the EVAP
system purge control solenoid valve. (E-33 only)
2
4
1
3
8) Remove the clamp (7).
9) Disconnect the ISC valve coupler (8).
8
email: info@motomatrix.co.uk / www.motomatrix.co.uk
B947H11406010
4
1
5
6
I947H1140254-01
7
I947H1140255-01
10) Place a rag under the fuel feed hose (9) and
disconnect the fuel feed hose from the fuel pump.
WARNING
!
For E-33 models, drain fuel from the fuel tank
before disconnecting the fuel feed hose to
prevent fuel leakage.
11) Loosen the throttle body clamp screws, left and right.
12) Lift up the throttle body from the intake pipes.
13) Disconnect the STP sensor coupler (10) and TP
sensor coupler (11).
9
I947H1140007-02
I947H1140256-01
10
11
I947H1140257-02