Repair Instructions; Engine Oil And Filter Replacement; Engine Oil Level Inspection; Oil Pan / Oil Strainer / Oil Pressure Regulator Removal And Installation - Suzuki GSF650A Service Manual

6) Stop the engine and remove the oil pressure gauge
and attachment.
7) Reinstall the main oil gallery plug and tighten it to the
specified torque.
CAUTION
!
Use a new gasket to oil leakage.
Tightening torque
Main Oil gallery plug (M16) (a): 35 N·m (3.5 kgf-
m, 25.5 lbf-ft)

Engine Oil and Filter Replacement

Refer to "Engine Oil and Filter Replacement in Section
0B (Page 0B-12)".

Engine Oil Level Inspection

Refer to "Engine Oil and Filter Replacement in Section
0B (Page 0B-12)".
Oil Pan / Oil Strainer / Oil Pressure Regulator
Removal and Installation
Removal
1) Drain engine oil. Refer to "Engine Oil and Filter
Replacement in Section 0B (Page 0B-12)".
2) Drain engine coolant. Refer to "Cooling System
Inspection in Section 0B (Page 0B-14)".
3) Remove the radiator (1), exhaust pipe (2) and
muffler. Refer to "Radiator / Cooling Fan Motor
Removal and Installation in Section 1F (Page 1F-5)"
and "Exhaust Pipe / Muffler Removal and Installation
in Section 1K (Page 1K-3)".

Repair Instructions

B817H21506001
B817H21506002
B817H21506003
1
2
I717H1150004-01
Engine Lubrication System:
8) Check the engine oil level. Refer to "Engine Oil and
Filter Replacement in Section 0B (Page 0B-12)".
4) Remove the water hoses (3). Refer to "Water Hose
Routing Diagram in Section 1F (Page 1F-3)".
5) Remove the oil pan (4). Refer to "Engine Bottom
Side Disassembly in Section 1D (Page 1D-51)".
1E-4
(a)
I717H1150003-01
3
I717H1150005-01
4
I717H1150006-01