Table of Contents
Advertisement
Connect the front brake light switch lead wires coupler
to the brake light switch.
A: Front brake light switch
B: Lead wire coupler
LEFT SWITCH
Insert the boss of the left switch holder into the hole on
the handlebars.
Tighten the left switch assembly with the two screws.
Be careful not to pinch the wiring harness
between the housing and holder.
A: Boss
B: Hole
C: 5 × 45 mm screw
D: 5 × 30 mm screw
Connect the clutch lever position switch lead wire cou-
pler to the switch.
A: Clutch lever position switch
B: Lead wire coupler
8
Advertisement
Table of Contents
