Steering Column Lock Cylinder Set; Disassemble - Off Vehicle; Steering Column Lock Cylinder Set - Assemble - Off Vehicle - GMC chevrolet camaro 2000 Service Manual

2-78 Steering Wheel' and Column - Tilt
343824
343829
343824
Steering
Steering Column lock Cylinder Set -
Disassemble - Off Vehicle
Disassembly Procedure
Important: The turn signal switch assembly does. not
have to be.pulled through the column when removing
unless necessary. Let the turn signal switch
assembly hang fr~ely after removal of the screws.
1. Remove the turn signal switch assembly. Refer to
Turn Signal and Multifunction Switch Assembly -
Disassemble - Off Vehicle.
2. Put the key in .the LOCK position.
3. Disco11nect the steering column key lock cylinder
setterminal connectors.
4. Attach a wire to the terminal connectors. This will
make installation easier.
5. Remove the byzzer switch assembly (3).
6. Remove the lock retaining screw (2).
7;, Remove the retaining clip (4) from the steering
column lock cylinder set terminal connector (5).
8. Remove the steering column lock cylinder set (1 ).
9. Gently pull the terminal connectors (5) through
the column.
Steering Column lock Cylinder Set -
Assemble - Off Vehicle
Assembly Procedure
1. Pull the steering column lock cylinder set
terminal connectors through the column and
reconnect. ·
(