GMC chevrolet camaro 2000 Service Manual page 231

1-134 HVAC Systems - Manual
282922
2
571436
1
2
571436
HVAC
12. Connect the temperature control cable to the
A/C module.
Notice: Refer to Fastener Notice in Cautions and
Notices.
13. Install the temperature control cable bolt.
Tighten
Tighten the temperature control cable bolt to
1.9 N·m (.17 lb in).
14. Install the right IP insulator. Refer to
Closeout/Insulator Panel Replacement - Right in
Instrument Panel, Gauges and Console.
Inside Air Valve Actuator Replacement
Removal Procedure
1. Remove the right side insulator. Refer to
Closeout/Insulator Panel Replacement - Right in
Instrument Panel, Gauges and Console.
2. Remove the left side insulator. Refer to
Closeout/Insulator Panel Replacement - Left in
Instrument Panel, Gauges and Console.
3. Remove the instrument panel (IP) compartment
door hinge screws.
4. Remove the IP compartment door.
5. Remove the heating, ventilation and air
conditioning (HV AC) module screws.
6. Remove the HVAC module cover.
7. Disconnect the air inlet valve linkage.
8. Remove the air inlet valve actuator (2) and
vacuum hose.
Installation Procedure
1. Install the air inlet valve actuator (2) and
vacuum hose.
2. Connect the air inlet valve linkage.
3. install the HVAC module cover.
Notice: Refer to Fastener Notice in Cautions and
Notices.
4. Install the HVAC module screws.
Tighten
Tighten the HV AC module screws to
1.8 N·m (16 lb in).
5. Install the IP compartment door.
6. Install the IP compartment hinge screws.
Tighten
Tighten the IP compartment hinge screws to
2.8 N-m (25 lb in).
(