Table of Contents
Advertisement
HVAC
Installation Procedure
1. Install the HVAC control selector switch (5) to the
control.
2.
Push the HVAC control selector knob
(1)
on.
3.
Install the HVAC control vacuum valve. Refer to
HVAC Control Vacuum Valve Replacement.
Temperature Control Cable Replacement
Removal Procedure
1.
Remove the right instrument panel (IP) insulator.
Refer to Closeout/Insulator Panel Replacement
~
Right in Instrument Panel, Gauges and Console.
2.
Remove the temperature control cable bolt.
3.
Disconnect the temperature control cable at the
air conditioning (A/C) module.
,
.
.
.
.
4.
Remove the accessory trim plate. Refer to Trim
Plate Bezel Replacement - IP Cluster (Chevrolet)
or Trim Plate Bezel Replacement - IP Cluster
(Pontiac) in Instrument Panel, Gauges and
Console.
5. Remove the heating, ventilation and air
conditioning (HV AC) control bolts.
6. Pull the HVAC control out of the IP far enough to
access the temperature control cable connection.
7. Remove the temperature control cable from the
control.
·
8. When releasing the control cable clips, use a
small screwdriver to gently pry the cable from
the controL
HVAC Systems - Manual
1-131
4
517338
282922
282920
Advertisement
Chapters
Table of Contents
