Brakes
) Repair Instructions
)
)
Park Brake Shoe Replacement
Removal Procedure
1. Remove the brake rotor. Refer to Brake Rotor
Replacement (Rear) in Disc Brakes.
2. Remove the parking brake shoe retaining clip and
attaching screw.
3. Remove the parking brake shoe by sliding the
brake shoe downward off tappet slot.
Installation Procedure
1. TurnJhe adjustable tappet until the tappet is
seated against adjuster nut. Orient the. slot
radially (parallel with mounting flange).
2. Install the parking brake shoe by sliding the. shoe
upwards into the tappet slots.
Notice:
Refer to Fastener Notice in a Cautions and
Notices.
3. Install the parking brake shoe retaining clip and
the attaching screw.
Tighten
Clip screw to 5 N·m (44 lb in).
4. Adjust the parking brake shoe to drum clearance.
Refer to. Park Brake Shoe Adjustment.
5. Install the brake rotor. Refer to Brake Rotor
Replacement (Rear) in Disc Brakes.
Park Brake 5-85
)
64007
64007