Steering
Lock Housing. Assembly - Disassemble -
Off Vehicle
Disassembly Procedure
1 . Remove the steering column lock cylinder set.
Refer to Steering Column Lock Cylinder Set -
Disassemble - Off Vehicle.
2. Remove the column housing cover end cap (2).
Remove the cruise control connector (3) from the
base plate (1) and disconnect.
3. Remove the 3 pan head 6-lobed socket tapping
screws: ( 1) at 12 o' clock, (2) at 3 o' clock and
(3) at 8 o' clock.
4. Remove the lock housing cover and sleeve
assembly (1).
Remove the column housing cover end ba.se
plate (2) and the dimmer switch rod actuator. (3).
Steering Wheel and Column - Tilt 2-87
1 . - - - - 2
343830
2
3
343832
1
343833