Compressor Clutch Coil Install (V7 - Direct Mount) - GMC chevrolet camaro 2000 Service Manual

HVAC Heating, Ventilation and Air. Conditioning 1-55
18. Install the rotor and bearing assembly retainer
ring using the J
6083.
19. Install the clutch plate and hub assembly. Refer to
Compressor Clutch Plate/Hub Assembly Install
(VS - Conventional Mount).
20. Install the shaft nut.
Compressor Clutch Coil Install
(V7 - Direct Mount)
Tools
Required
• J 8433 Compressor Pulley Puller
• J 8433-3 Forcing Screw
• J 33024 Clutch Coil Installer Adaptor
') • J 33025
Clutch Coil Puller Legs
)
• J.41790 Compressor Holding Fixture
1. Place the clutch coil assembly (1) on the front
head with the clutch coil terminal positioned at
the mark made during disassembly.
2. Place the J
33024
over the internal opening of the
clutch coil housing and align installer with the
compressor front head.
3. Install the J
8433-3
into the J
8433
and center the
screw in the countersunk center hole of
the J
33024.
4. Install the 4 inch through bolts and washers from
the J 42136 tool kit into the J
33025
and attach
them to the compressor mounting boss.es.
5. Turn the center forcing screw of the
J
8433
to
press the clutch coil onto the front head until
the clutch coil is fully seated.
Make sure the elute~ coil and the
J
33024
stay
in-line with each other while pressing the
clutch coil onto the compressor.
6. Install the compressor clutch rotor and bearing
assembly. Refer
to
Clutch Rotorand/orBearing
Install (V7 - Direct Mount).
7. Install the compressor clutch plate and hub
assembly. Refer tci Compressor Clutch Plate/Hub
Assembly Install (V7 - Direct Mount).
8. Remove the compressor from the J
41790.
9. Install the compressor into the vehicle.
)
/
J
34992
237119
157238