Brake Pads Replacement (Rear) - GMC chevrolet camaro 2000 Service Manual

5-60 Disc Brakes
451525
465503
181856
Brake Pads Replacement (Rear)
Removal
Procedure
Brakes
1.
Remove two-thirds of the brake fluid from the
master cylinder.
2. Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle in General
Information.
3. Remove the tire and wheel. Refer to Tire and
Wheel Removal and Installation in Tires and
Wheels.
4. Install two wheel nuts (1) in order to retain the
rotor (2).
5. Position a C-clamp (2) over the caliper
housing (1 ).
6. Tighten the C-clamp until the caliper piston
bottoms in the base of the brake caliper.
Verify that one end of the C-clamp rests on the
brake hose fitting bolt/screw and the other
end rests against the outer pad.
(