GMC chevrolet camaro 2000 Service Manual page 204

HVAC HVAC Systems - Manual 1-107
HVAC Components (cont'd)
Name Location Locator View
Connector End View
Part of the IP harness, between the left Harness Routing Views in
lnline Harness Connector
C2000 (48 cavities) End Views in Wiring
kick panel and the steering column Wiring Systems
Systems
IP to engine harness, under the right side
Harness Routing Views in
lnline Harness Connector
C230 (10 cavities) End Views in Wiring
of the IP, behind the knee bolster Wiring Systems
Systems
G112
Attached to the rear of the left Harness Routing Views in
cylinder head Wiring Systems
-
G200
Near the left A-pillar, bolted to the IP Harness Routing Views in
-
mounting stud behind the kick panel Wiring Systems
G201
Near the right A-pillar, bolted to the IP Harness Routing Views in
-
mounting stud behind .the kick panel Wiring Systems
P100
Left side in the dash panel, engine to the Harness Routing Views in
-
passenger compartment Wiring Systems
P110
Right side in the dash panel, engine to the Harness Routing Views in
-
passenger compartment Wiring Systems
8105 (VS VIN G)
In the engine harness at the A/C
-
-
refrigerant pressure sensor breakout
In the engine harness, main branch,
8108 (V6 VIN K) approximately 15 cm (6 in) from
- -
G 112 breakout
8108 (VS VIN G) In the engine harness, main branch,
(Automatic approximately 5 cm (2 iri) from the -
-
Transmission) automatic transmission breakout
8108 (VS VIN G)
In the engine harness, main branch,
(Manual Transmission)
approximately 12 cm (4.7 in) from the
-
-
vehicle speed sensor breakout
In the engine harness, approximately
8110 (V6 VINK) 4 cm (1.6 in) from the powertrain control -
-
module (PCM) breakout
In the engine harness, main branch,
8110 (VS VIN G) approximately 20 cm (7.9 in) from the -
-
powertrain control module (PCM) breakout
8114 (V6 VINK)
In the engine harness, approximately
-
-
3 cm (1.2 in) from the generator breakout
In the engine harness, approximately
8114 (VS VIN G) 17 cm (6.7 in) back from the A/C -
-
compressor clutch breakout
8115 (V6 VINK)
In the engine harness at the generator
-
-
breakout
In the engine harness, approximately
8115 (VS VIN G) 20 cm (7.9 in) back from the A/C
-
-
compressor clutch breakout
In the engine harness, main branch,
8121 (V6 VIN K) approximately 8 cm (3.1 in) from the -
-
powertrain control module (PCM) breakout
In the engine harness, approximately
8128 4 cm (1.8 in) from the manifold absolute
-
-
pressure (MAP) sensor breakout
In the forward lamp harness,
8165
approximately 7 cm (2.8 in) from the main
-
-
branch into the engine wiring harness
junction block 2 breakout
In the IP harness, main branch,
8216 approximately 10 cm (4 in) from the -
-
instrument cluster breakout
8248
In the IP harness, approximately
- -
2 cm (0.8 in) from DRL module breakout