GMC chevrolet camaro 2000 Service Manual page 549

5-76 Disc Brakes
2
177036
2
177068
2
177063
Brakes
Brake Caliper Bracket Replacement (Front)
Removal Procedure
1. Remove the inner and outer pads. Refer to Brake
Pads Replacement (Front). '
Caution: These fasteners MUST be replacedwith
new fasteners anytime they become loose or
are removed. Failure to replace these fasteners
after they become loose or are removed may cause
Joss of vehicle control and personal injury.
2. Remove the caliper bracket bolts (2).
3. Remove the caliper bracket (1 ).
4. Remove .the following components from the
bracket (1 ):
• The boot bolts (2)
• The bushings
5. Inspect the bracket for cracks.
6. Replace the bracket if necessary.
Installation Procedure
1. Lubricate the following components with silicone
grease:
• New bolt boots
• New bushings
2. Install the following components into the caliper
bracket (1 ):
.. The bolt boots (2)
• The bushings
Notice: Refer to
Fastener Notice in Cautions and
Notices.
3. Install the caliper bracket with the bracket bolts.
Tighten
Tighten the caliper bolts to 100 N-m (74 lb ft).
4. Install the inner and outer brake pads. Refer to
Brake Pads Replacement (Front).
(
(
(