Hazard Warning Switch Replacement - On Vehicle; Tilt Lever Replacement - On Vehicle - GMC chevrolet camaro 2000 Service Manual

2-62 Steering Wheel and Column - Tilt
290205
290205
2
1
290197
Steering
Hazard Warning Switch Replacement • On
Vehicle
Removal Procedure
Caution: Refer to SIR Handling Caution in Cautions
and Notices.
Important: Do not remove the steering column in
order to replace the hazard warning switch. Refer to
Steering Column Replacement.
1. Remove the bolt/screw (4).
2. Remove the button (3).
3. Remove the spring (2).
4. Remove the knob (1 ).
Installation Procedure
1. Install the knob (1 ).
2. Install the spring (2).
3. Install the button (3).
Notice:
Refer to
Fastener Notice
in Cautions and
Notices.
4. Install the bolt/screw (4).
Tighten
Tighten the bolt/screw to 0.7 N·m (6 lb in).
Tilt lever Replacement - On Vehicle
Removal Procedure
1. Lower the steering wheel to access the tilt lever
easier.
2. Firmly grip and twist the tilt wheel release
lever (3) counterclockwise.
(