GMC chevrolet camaro 2000 Service Manual page 668

Brakes
Antilock Brake System 5.;195
DTC C0240 PCM Traction Control Not Allowed
Step
Action Value(s) Yes No
Was the Diagnostic System Check performed? Go to A
1
-
Diagnostic
System
Go to Step2 Check-ABS
1. Turn the ignition switch to the RUN position with the
Go to Diagnostic
engine off.
Trouble
2
2. Using a Scan Tool, read the ABSffCS DTCs.
-
Code (OTC)
Are any other DTCs set?
List/Type for the
appropriate
OTC table
Go to Step3
3 Is DTC C0240 set as a current code? Go to Step5 Go to Step 4
1. Using the scan tool clear the OTC.
2. Remove the scan tool from the DLC.
Go to A
4
3. Carefully drive the vehicle above 12 Km/h (8 mph) for
-
Diagnostic
several minutes.
System
Did OTC C0240 set as a current DTC? Go to Step 5 Check-ABS
Perform the Powertrain OBD System Check. Refer in
Go to Powertrain
5
A Powertrain On Board Diagnostic (080) System Check.
-
Go to
Control Module
Did the vehicle pass the OBD System Check? Diagnostic Aids Diagnosis
)
)