Repair Instructions; Ignition Switch Replacement - On Vehicle - GMC chevrolet camaro 2000 Service Manual

Steering
J
Repair Instructions
)
Ignition Switch Replacement - On Vehicle
Removal Procedure
Caution: Refer to SIR Handling Caution in Cautions
and Notices.
Caution: Refer to Battery Disconnect Caution in
Cautions and Notices.
1. Disconnect the negative battery cable.
2. Remove the inflatable restraint coil.
3. Insert the ignition key into the lock cylinder.
Leave the key in the LOCK position.
4. Remove the lock retaining screw (2).
5. Remove the lock cylinder (1) and harness (4),
perform the following:
5.1. Disconnect the terminal connector from the
bulkhead connector.
5.2. Remove the wiring protector.
5.3. Disconnect the retaining clip (3) from the
lock housing cover sleeve.
5.4. Gently pull wire harness (4) through the
column.
5.5. Remove the lock cylinder (1) from the
vehicle.
Steering Wheel and Column - Tilt 2-59
\
363517
2
3
363518