GMC chevrolet camaro 2000 Service Manual page 226

)
HVAC
Installation Procedure
1. Install the control lamp bulbs to the control lamp
harness (2).
2.
Install the HVAC control wiring harness
(2)
to the
control.
3. Install the HVAC control. Refer to Control
Assembly Replacement.
HV AC Control
Blower
Switch Replacement
Removal Procedure
1.
Remove the heating, ventilation and air
conditioning (HV AC) control. Refer to Control
Assembly Replacement.
2. Pull the HVAC control blower knob (1) off.
3. Remove the HV AC control blower switch
screw (2).
4. Remove the HVAC control blower switch (3). from
the control.
Installation Procedure
1. Install the HVAC control blower switch (3) to the
control.
Notice: Refer to Fastener Notice in Cautions and
Notices.
2. Install the HVAC control blower switch screw (2).
Tighten
Tighten the HV AC control blower switch screw (2)
to 2 N·m (18 lb in).
3. Push the HVAC control blower knob (1) on.
4. Install the HV AC control. Refer to Control
Assembly Replacement.
HVAC Systems - Manual 1-129
517337
517336
517336