Rear Axle Lower Control Arm Replacement - GMC chevrolet camaro 2000 Service Manual

Suspension
Installation Procedure
J
1. 1.nstall the jounce bumper spacer, if equipped.
2. Install the jounce bumper (2).
Notice:
Refer to Fastener Notice in Cautions and
Notices.
3. Install the jounce bumper bolts (1 ).
Tighten
Tighten the jounce bumper bolts (1) to
. 27 N·m (20 lb ft).
4. Remove the rear axle support.
5. Lower the vehicle.
Rear Axle Lower Control Arm
Replacement
Removal Procedure
Important: If replacing both lower control arms,
remove and replace only one control arm at a time in
order to prevent the rear axle from rolling or slipping
sideways.
1.
Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle in General
Information.
2. Remove the lower control arm bolts (5), nuts (2)
and washers ( 4) from the rear axle ( 1).
3. Remove the lower control arm bolts, nuts and
washers from the underbody pan.
4. Remove the lower control arm (3).
Rear Suspension 3-45
5
181230
481848
2
181238