Horn Switch Replacement - On Vehicle; (Chevrolet) - GMC chevrolet camaro 2000 Service Manual

)
)
Steering
Installation Procedure
" Firmly grip and twist the tilt wheel release
lever (3) clockwise.
O
Raise the steering wheel.
Horn Switch Replacement - On Vehicle
(Chevrolet)
Removal Procedure
Caution: Refer to SIR Handling Caution in Cautions
and Notices.
1.
Remove the inflatable restraint steering .wheel
module (4).
2. Remove the screw (3) from the ground lead.
3. Disconnect the power lead (8) by pulling
straight out.
Installation Procedure
1. Install the horn switch (2) to the inflatable restraint
steering wheel module (4).
Notice: Refer to Fastener Notice in Cautions and
Notices.
2. Install the screw (3) to the ground lead.
Tighten
Tighten the bolt/screw (3) to 1.9 N-m (17 lb in).
3. Connect the power lead (8) by pushing straight
into the outlet.
Steering Wheel and Column - Tilt 2-63
3
290197
290190
290190