GMC chevrolet camaro 2000 Service Manual page 541

5-68 Disc Brakes
221494
221490
Brakes
11. Lubricate the inner diameters of the caliper bolt
bushings with silicone grease. Also lubricate the
caliper bolts with silicone grease.
12. Inspect the inner and outer pads for wear.
13. Inspect the inner and outer pads for
maximum taper.
• Maximum taper of the rear brake pads is
0.15 mm (0.006 in).
• If the pads are tapered beyond the maximum
specification, replace the inner and outer
pads as a complete set only.
Installation Procedure
1. Install the inner and outer pads (2) into the
mounting plate (1 ).
2. Install the rear brake caliper (3) over the brake
pads
(2)
and into the caliper mounting plate
(1 ).
Notice:
Refer to
Fastener Notice
in Cautions and
Notices.
3. Install new brake caliper guide pin bolts.
Tighten
Tighten the brake caliper guide pin bolts to
37 N-m (72 lb ft).
(
(