Power Steering Pump Rear Bracket Replacement - GMC chevrolet camaro 2000 Service Manual

Steering
Power Steering Pump Rear Bracket
J
Replacement
)
)
Removal Procedure
1. Remove the power steering pump {V8 only).
Refer to Power Steering Pump Replacement (VB).
2. Remove the rear power steering pump bracket
bolts (3).
3. Remove the rear power steering pump bracket (2)
from cylinder head (1 ).
Installation Procedure
1 . Install the rear power steering pump bracket (2) to
cylinder head (1 ).
Notice: Refer to Fastener Notice in Cautions and
Notices.
2. Install the rear power steering pump bracket
bolts (3).
Tighten
Tighten the power steering pump bracket bolts (3)
to 50 N-m (37 lb ft).
3. Install the power steering pump (V8 only). Refer
to Power Steering Pump Replacement (VB).
4. Bleed the power steering system. Refer to
Bleeding Power Steering System.
Power Steering System 2-27
3 2
~
354413
3 2
354413